Scope 1 vs. Scope 2 Emissions, Explained Without the Jargon

Two terms that show up on every sustainability report - here’s what they actually mean.

If you’ve ever read a sustainability report and saw the terms “Scope 1” and “Scope 2” without anyone explaining what they mean, you’re not alone. The idea is simple once the jargon is out of the way. And even if you already know it, there are a few details further down that are worth a look.

These definitions follow the GHG Protocol, the most widely used accounting standard for corporate emissions reporting - the same framework most ESG reports and disclosure requirements are built on.

The short version

Scope 1 = emissions you create directly. Scope 2 = emissions created on your behalf, to power you. Scope 3 = everything else in your value chain.

Scope 1: What you burn yourself

Scope 1 covers emissions from sources your company owns or directly controls. If your business burns the fuel itself, it’s Scope 1.

Common examples:

  • Natural gas burned in an on-site boiler or furnace

  • Fuel burned in company-owned vehicles or forklifts

  • Refrigerant leaks from your own air conditioning or cooling systems

  • Any on-site generator or backup power burning fuel

The common thread: something is being combusted, or leaking, directly on your property or in your equipment. You can trace it back to a source you control.

Scope 2: The emissions behind your power bill

Scope 2 covers emissions from the electricity, steam, heating, or cooling you buy from someone else.

Here’s the part that trips people up: you don’t burn anything yourself in Scope 2. But the power plant that generated your electricity may have. Scope 2 is your share of that.

That’s why Scope 2 depends on where and when your electricity is generated. Two buildings using exactly the same amount of power can have very different Scope 2 footprints depending on the grid behind them.

Why the distinction matters

It’s not just a technicality. Scope 1 and Scope 2 point to two very different levers:

  • Reduce Scope 1 by changing what you burn on-site. More efficient equipment, electrifying a process that used to run on gas, fixing refrigerant leaks.

  • Reduce Scope 2 by using less electricity, shifting when you use it (away from high-emission peak periods), or sourcing cleaner power.

If you only track one number - “total emissions” - you can’t tell which lever to pull. Splitting Scope 1 and Scope 2 is what makes a report actually actionable instead of just a number for a compliance form.

What even experienced reporters often overlook

Scope 2 has two versions, and they can differ. The location-based version uses the average emissions of your local grid, while the market-based version reflects what you chose to buy, such as renewable energy certificates or a green power contract. Reports should say which one they’re using. The standard behind both is being updated, and the proposed direction is toward hourly, matching emissions to the hour you actually used the power.

Ontario’s grid is clean, but moving the wrong way. According to the IESO’s 2025 Year in Review, gas and oil produced 19.3% of Ontario’s electricity in 2025, up from 15.7% in 2024. The IESO also says its system uses gas generation to help meet system peaks, which suggests when you use power matters, not just how much.

Your Scope 2 can rise while your usage doesn’t. Scope 2 depends on how clean the grid is, not just how much power you use. When the grid leans more on gas, your number goes up even if your consumption stays flat.

After you electrify, read your scopes together. Electrifying means replacing equipment that burns fuel on site, such as a gas boiler or furnace, with electric equipment, such as a heat pump. Part of your footprint then moves from Scope 1 (the fuel you used to burn) to Scope 2 (the electricity you now buy). So your Scope 1 will fall and your Scope 2 will rise. Look at either one alone and the project can seem to have failed or to have worked miracles. The total is what tells you.

Scope 3: everything else

Scope 3 covers every other emission connected to your business: your suppliers, business travel, employee commutes, and what happens to your products after you sell them. The GHG Protocol splits it into 15 categories, grouped as upstream (what you buy or use to run your business) and downstream (what happens after your product or service leaves your hands).

For many companies it’s the largest part of the footprint, and the hardest to measure, because it comes from external operations. Most Scope 3 numbers rely on supplier data, industry averages, and estimates. That’s why most companies start with Scope 1 and 2, where the data comes from your own bills and meters.

Scope 3 also overlaps with your utility bills. When you burn natural gas, Scope 1 counts only the burning. The emissions from getting that gas to you (extracting, processing, and delivering it) are counted separately, in Scope 3. The same goes for electricity: the fuel used to generate it and the power lost on the way to you. The GHG Protocol groups these together as “fuel- and energy-related activities”.

Why “defensible” matters more than “precise-sounding”

Here’s where a lot of Scope 1 and 2 numbers quietly fall apart: they’re built on estimates and averages instead of what actually happened. A Scope 2 number calculated from an annual average grid emissions factor will not hold up the same way a number calculated from real, hourly consumption and the grid’s actual hourly emissions intensity will. As the GHG Protocol’s draft shows, that’s the direction the standard is heading.

That distinction is exactly why “defensible” - not just “calculated” - is the right bar for a number you’re putting in front of an insurer, a board, or an auditor.

See how Askiy calculates yours.

Previous
Previous

Inside Askiy: What “Audit-Ready” Actually Means

Next
Next

The Real Cost of Manual Energy Reporting